Category: Projects

Posted on

EoS Week 6

Progress: I was out of town for a bit of last week and the weekend so I was only able to work on TinkerCAD and I’ve almost finalized my design for the housing, I just need to add some finishing touches. I took Marianne’s idea of angling the range finder housing and it looks pretty good, it’s just a little deceiving since it looks so big but it’s actually in millimeters. Also my power boost came in the mail today so I’ll be able to work on finalizing my soldering with finishing up the power component.

Issues: The only big issue was my lack of free time to work on this the past week, but on the bright side there is not much left other than finishing the housing and printing it and soldering the last bits. We’ll see if the electronics cause any issues this week and if I need to do any last minute pivoting.

 

This Week: I’m looking to solder my power component in on Tuesday, which shouldn’t take too long. Then hopefully I can also finish up my housing design and get the process to print it in motion in case I need to do any changes from the first design. I said last week that I want to have it complete by Thursday and I’m still optimistic that I can meet that deadline but it all depends on what roadblocks I get with the final electronic product and if my TinkerCAD design is correct.

 

Posted on

Post #5 Aurora

2. Tested laser cutting my pattern with Luisa. Found that neoprene cuts very well with the laser cutter. I also straightened out some shipping issues I was having with my final fabric. I created a 2 in width pattern in illustrator for the back of my jacket too.

3. Getting the right neoprene fabric is harder and taking longer than usual. I was offered expedited shipping from wholesale fabric direct if they have the correct stuff. I’m feeling overwhelmed with the amount of work I still have to do and worried for the final due date.

4. This week I’m going to edit the widths of my traced pattern and cut them out. I’m also going to sew my prototype jacket back together as efficiently as possible.

Posted on

Week 5 Haptic Glove Update

An image or video

Tested the new way of twining the actuator wires

A Listing of accomplishments made by all group members for the previous week

  1. Used conductive wires with actuator wires to provide stronger contracting effect
  2. Created a new way of constructing the wires to provide contracting feedback
  3. Used Arduino to control rumble motors on different frequencies (Plan B)

A description of problems encountered and outstanding issues

  1. Have some problems in the connection between Unity and Arduino (IOexception)
  2. The wire’s feedback was sometimes unpredictable

A plan for the next week of work

  1. Figure out the connection between Unity and Arduino
  2. Learn to implement the leap motion into Unity
  3. Try adding conductive covers on the actuator wires to ensure constant feedback
  4. Try to create scenes in Unity
Posted on

Shoe Construction

  • Last week
    • I started putting together the shoe pieces I already had so that I can build the base for the prototype.

    • I also redesigned the heel components so that they do not have to complete 2 full rotations to extend their full length; I increased the height so that they will be able to condense/ extend from 0.75”-4”; and I added loops on top so that we can test if springs will be able to attach and  facilitate rotation.

  • This week
    • I plan on finishing the shoe base and testing the new heel components.
Posted on

Sirena post #5

Regarding the design for this past week, Emma was able to have a software training session with a student that knows SketchUp very well and she was able to create an updated design that will have 3 separate pieces as of right now. The design has a curvature to it that it didn’t have before which can help with the feel of it.

When creating the design, some challenges that arose included sizing and proportion and there are definitely some things that need to be changed but in order for those changes to be made, it needs to be printed and figured from there.

This week Emma will make sure to get it printed and from there have a better idea what the next steps are regarding the design. It is taking her much longer than expected but definitely making improvements.

 

This past week Keegan dealt a lot with coding of the app and improving functionality. We decided to switch to an online app development website called Ionic to create interface and perform tasks like sending SMS texts and emails. The site has proven to be very content heavy and Keegan has so far watched a lot of tutorials on Ionic and how it works but hasn’t been able to implement any significant advances.

A catastrophic setup backup almost happened with the Simblee when it stopped showing up in the port on Keegan’s Macbook. After some slightly panicked searching of the web he found out the SMC could be reset and the problem should be resolved. Luckily it was and we avoided having to order another Simblee and rush the project more.

This week has to see developments in the app and how we can send texts and/or emails when the button on the bracelet is held. Keegan will be focusing on improving functionality through Ionic.

Posted on

EoS Week 5

Progress: Everything has been soldered together aside from the voltage divider I’m going to need to make this week to power the range finder and the OLED screen. It shouldn’t be too difficult once I get the other resistor I need.

I’ve also started working on housing designs in Tinker Cad and hope to be able to print them next week. I made one option where the range finder could be on the back half of the holder, and the other option I’ll look at is if it is further up, closer to where the mirror is located (the second image).

Problems: Looking for a 5v power source I can use has been an absolute nightmare. At this point I’m leaning towards getting a battery housing and just use 4 AA batteries and hacking together a power source and have the housing open up to replace the batteries. It seems as though rechargeable 5v batteries are nonexistent, or I have to wait a month for shipping.

This Week: Hoping to finish up the Tinker Cad designs and the voltage divider so that I can print the housing and start assembling it all together. Ideally I’d like to have it functional by next week Thursday but we’ll see if I have anymore setbacks.

Posted on

Uncoventional Honesty Post 5

This week, we made a lot of progress! We struggled with lighting out neopixel strips, but Andres and Fang got them to finally light up by the end of Thursday’s work day.


We also explored the jacket deconstruction and reconstruction. The jacket had the pockets sewn in and Jade started experimenting with how to best make a tunnel of organza for the neopixel strip to slide through. The best method found so far is running a doubled-up layer of organza through the serger on both sides then stitching it onto the jacket.

This week, we will work to attach the neopixel connection to the heart rate monitor, work on the “tunnels” for the neopixel strips, and, hopefully, attach the strips to the jacket.

Posted on

Bike post #1

This past  week I finished weaving the FO pieces.

I also printed an adapter to align the FO an the neo-pixles.

it channels the fibers so the beam is incident to the cross section of the fiber.

  • The leather has been purchased and I’m waiting for its arrival.
  • This present week, I will wire and sew the circuit in to the base fabric.
  • … and test the electronics.
  • if time allows I’ll do a test with the laser cutting to prepare for next week.
Posted on

Aurora Post #4

Over the weekend I designed a potential pattern that I will laser cut and hopefully successfully use on parts of the jacket. I had to purchase Adobe Cloud for $20/month.

Let me know if you have any feedback on this pattern! My backup pattern would be a simple pattern of small circles.

My prototype jacket is fully seam-ripped. It is ready to trace but I ran into a problem with the fabric supplier I went with online. They are moving locations and I read in the email after I purchased some fabric samples that shipping may be delayed and they are moving through April 28th…So I have to call and see if they can meet my time sensitive request or if I have to quick order from another website.

My main goal this week is to make a trip a Joanne’s Fabrics and order/purchase my neoprene fabric for the final product asap. I also am waiting to hear back from a supplier with a white EL strip product that I want to purchase. I too, am waiting to hear from Lunabrite if they have a sample piece of blue luna gel glow fabric I can get for my final product.

Posted on

Muscle Jet Post#4

  1. I’m going with plan B: 

  1. I’ll still be using the FO fabric I’m making, which is half way done
  2. Buying multiple sensors became too expensive
  3. Cut the leather sow the components in to it, print adapter for the LED to FO fabric.